1 MBytes 2 GBytes 3 Current Log File: 4 Untitled 5 SCSI 6 IDE/ATAPI 7 NT Driver: 8 Host Adapter: 9 &File 10 &New 11 &Open 12 &Save 13 Save &As... 14 &Change Drive 15 &Print 16 &Options 17 &Data Size 18 &Retension Before Test 19 &Help 20 Help &Topics 21 &Seagate Tape Home Page 22 &About 23 Unable perform a drive inquiry on, 24 Failed to communicate with drive that appears registered with the operating system. 25 Warning - No Communication With Drive 26 Unable to communicate with the tape drive. Another application may currently have exclusive access to the drive. If this is the case, you will need to exit the Seagate Tape Diagnostic, shut down any applications accessing the tape drive, and then restart the Seagate Tape Diagnostic, 27 Approximately 28 on tape drive: 29 Test Read-Write 30 WARNING: ALL EXISTING DATA ON THIS TAPE WILL BE DESTROYED.\n\nPlease make sure that a scratch tape of the proper format is inserted into the drive and that the write-protect tab is in the Off position.\n 31 Test Read-Only 32 This operation requires a scratch tape of the proper format that has been previously written using the Test Read-Write command. The amount of data to be read must be the same or less than the amount that was previously written.\n\n 33 Test Hardware Compression 34 WARNING: ALL EXISTING DATA ON THIS TAPE WILL BE DESTROYED\nINCLUDING PREVIOUS READ-WRITE TESTS.\n\nPlease make sure that a scratch tape of the proper format is inserted into the drive and that the write-protect tab is in the Off position.\n 35 If compression has been tested since the last Read-Write test was performed, this Read-Only test will fail because the Compression test produces a different data set. 36 Test Data Value May Be Too High 37 The data value exceeds the useable area on the media. 38 The tape diagnostic utility has cancelled the previous operation. However, the current state of drive data compression is: OFF.\n\nWould you like to turn data compression on? 39 Tape Drive Data Compression 40 Received user input to CANCEL test. 41 Canceling Test 42 Cancellation complete. 43 Selected: Test Read-Only. 44 Selected: Test Read-Write. 45 Examining compression attributes. 46 Failure: End of Data (EOD) marker has been detected. 47 Failure: End of Partition (EOP) marker has been detected. 48 Failure: Check tape write protection. 49 Test less than 101 / 1011 &Test Read-Write 1012 Test &Read-Only 1013 Check &Media Capacity 1014 R&etension Tape 1015 Test Hardware &Compression 1119 &OK 59136 EXT 59137 CAP 59138 NUM 59139 SCRL 59140 OVR 59141 REC 59143 Test Title 59144 This is a test question. 59145 No Log File Selected 59146 No Log File has been selected in which to save the current messages. 59147 Save Messages 59148 The current messages appearing in the message log have not been saved and will be lost. Would you like to save them to the current Log File? 59149 Byte Entry Error 59150 The value entered must be an integer value and be greater than\nor equal to 5 MBytes (1 GByte, if GBytes is selected).\n\nIn either MBytes or GBytes, the actual number value should not\nexceed 2,147,483,647. 59151 Operating System Incompatible 59152 This utility is designed to work with the Windows 95, Windows 98, and Windows NT operating systems. 59153 No Log File Selected To Print 59154 A log file must be selected for printing. Open a log file or save the contents of any unsaved messages now appearing in the message log. 59155 Welcome to the Seagate Tape Diagnostic Utility 59156 This utility will test SCSI and IDE/ATAPI tape drives from Seagate, Conner and Archive. 59157 Please select a language 59158 Welcome 59159 The Seagate Tape Diagnostic has detected the following Seagate SCSI and/or ATAPI/IDE tape drive(s) attached to your system. 59160 Select a Tape Drive 59161 Seagate Tape Diagnostic 3.0 A 59162 Current Drive Selected 59163 Options Selected 59164 Operational Status 59165 Operations 59166 System Configuration Check 59167 !!! System Initialization in Progress !!! 59168 MBytes (uncompressed) remaining capacity 59169 Warning: 59170 not supported. 59171 Drive Not Supported 59172 Timeout Error 59173 The current tape drive operation timed-out before completing. 59174 System Message 59175 A system-level tape drive error has occurred. Click OK and view the message log for more detail. 59176 has occurred. See message log. 59177 System Failure 59178 Unable to load: Wnaspi32.dll. Exiting tape diagnostic utility. Please contact your system administrator. 59179 Unable to access Wnaspi32.dll support functions. Exiting tape diagnostic utility. Please contact your system administrator. 59180 Can't create an event during initialization using CreateEvent(). Exiting tape diagnostic utility. Please contact your system administrator. 59181 Unable to find host adapter 59182 The diagnostic tape utility may be in an unstable state. 59183 Selected: Check Media Capacity. 59184 Issued Cmd: Test Unit Ready. 59185 Is the correct tape loaded in the drive? 59186 Issued Cmd: Load Tape with Retension. 59187 Issued Cmd: Load Tape. 59188 Write Operation 59189 Issued Cmd: Write File Marks. 59190 Issued Cmd: Rewind Tape. 59191 Read Operation 59192 Issued Final Cmd: Rewind Tape. 59193 Issued Cmd: Write 59194 MB to tape. 59195 GB to tape. 59198 Issued Cmd: Read and Compare 59199 MB of data from tape. 59200 Selected: Retension Tape. 59201 Selected: Test Compression. 59202 Write Command Complete. 59203 Test failed. A Read/Compare error has been detected - possible read beyond the end of valid data. 59204 Test completed successfully. 59205 Test failed due to excessive errors. 59206 Retry the test with a different tape and/or clean the drive. 59207 GB of data from tape. 59209 Failure on: Load Tape 59210 Failure on: Retension Tape 59211 Tape retension complete. 59212 Failure on: Write File Marks 59213 Failure on: Rewind 59214 Failure on: Test For Unit Ready 59215 Failure on: Write Data to Drive. 59216 Failure on: Read Data From Drive 59217 Failure on: Read Position 59218 Failure on: Log Sense 59219 Failure on: Log Select Reset 59220 Tape drive compression is operating normally. 59221 Tape drive compression is turned-off, unable to perform compression check. 59222 ASPI Manager Initialization failed. Exiting utility. 59223 Test Length: 59224 Tape Retension: 59225 MB 59226 GB 59227 On 59228 Off 59229 Unavailable 59230 < &Back 59231 &Next > 59232 E&xit 59233 &Cancel 65535 Uncompressed Data Value: